The OrCam Read is not downloading a software update

1. Make sure that you have connected your device to WiFi.
   • Click here for more information on how to connect your device to WiFi. 
   • Click here to troubleshoot WiFi connection issues. 
2. If the device connects to WiFi successfully and does not start downloading after 5 minutes, try disconnecting and reconnecting the charger so that the device reconnects to the WiFi again. 
3. Reboot the device
   1. Long press on the power button for about 10 seconds until you hear a “beep”
   2. Once the device is rebooted, wait for 5 minutes to see if the new software version will now start downloading.
4. Try switching to a different WiFi network, then try updating again.
5. If the device doesn't start downloading after 5 minutes try to reset installation retries via the user menu:
   1. Enter the settings menu 
      • Click here for more information on how to enter the settings menu on the OrCam Read. 
   2. Scroll through the menu until you reach "General Settings Menu" and tap the trigger button to select.
   3. Scroll through until you reach “Reset installation Retries” and press the trigger button to select.
   4. Follow the prompts to reset the installation retries.