FAQs
      Back to home
      1. Help Center
      2. OrCam MyEye Smart & OrCam MyEye Pro
      3. FAQs

      How do I connect my OrCam MyEye to Bluetooth?

      Click here to view a tutorial video on how to connect your OrCam MyEye to OrCam Bluetooth earphones
      Click here to view a tutorial video on how to connect your OrCam MyEye to other Bluetooth devices

      To connect your OrCam MyEye to Bluetooth devices:
      1. Enter pairing mode on your Bluetooth device
        • On OrCam Bluetooth earphones you can do this by holding down the power button (the round middle button) for about 6 seconds until the light flashes blue and red.
          • When the light is flashing blue and red, that means it's in pairing mode and ready to be connected. It will not connect, if the light is not flashing.
        • For other Bluetooth devices please check the device's user manual for instructions on how to enter pairing mode.
      2. On your OrCam MyEye Device:
        1. Say "Hey OrCam, Connect to the Bluetooth Audio Device"
          • Alternatively you can double-tap on the touch bar rapidly and you wait for the long beep.
          • At the end of the long beep, say "Connect to the Bluetooth Audio Device"
        2. Then Tap on the Touch Bar to confirm your choice to connect and find a BT device.
        3. Now the device should be making faint beeps (this means the device is searching for your Bluetooth audio device).
        4. The OrCam MyEye will then say the name of the devices it has found, swipe on the touch bar to navigate the Bluetooth devices found until it finds the correct device
        5. Tap on the Touch Bar to connect to the device selected.
        6. Now your OrCam MyEye is connected to the Bluetooth device.
        7. Using your Bluetooth device, try to read something with the OrCam MyEye to confirm that the sound is transmitting via the Bluetooth device.

      You can adjust the volume with the OrCam device and with the volume buttons on the earphones.

      Note: If the OrCam MyEye did not connect, the Bluetooth device was probably not in pairing mode. Remember, on OrCam Bluetooth earphones the red and blue light will flash on the earphones when they are in pairing mode. (This will differ if you are using a different Bluetooth device)


      Now, that you've connected it once. You don't need to do this every time. The earphones will automatically connect to your OrCam device when you put the earphones on pairing mode.

      OrCam recommends keeping 1 specific pair of Bluetooth earphones for you OrCam device, to ensure that they will always pair with your OrCam device.